Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About framosCTLink
framosCTLink
Here to help
Member since Mar 7, 2019
02-11-2022
Franco Ramos
Community Record
17
Posts
3
Kudos
0
Solutions
Badges
09-14-2020
05:41 PM
Thank you for this, got totally confused yesterday and forgot to test both sides of the network, will update my post later. Thanks again!
... View more
09-14-2020
01:42 AM
Hi Guys, Im quite confused right now if I was able to configure everything correctly. For any routing expert out there, may I seek help please? My issue is I want Branches A, B & C talk to Branches XYZ back-to-back thru Meraki having different network provider with different physical circuits. (please see connections below) If this might help explain the issue much further: Provider 1 Routing table sample is below: 192.168.100.0/24 next hop 192.168.0.246 192.168.110.0/24 next hop 192.168.0.246 and so on.. Meraki Routing table 192.168.100.0/24 next hop 192.168.100.1 192.168.110.0/24 next hop 192.168.100.1 192.168.10.0/24 next hop 192.168.0.1 192.168.20.0/24 next hop 192.168.0.1 Provider 2 Routing table 192.168.10.0/24 next hop 192.168.0.1 192.168.20.0/24 next hop 192.168.0.1 and so on... after configuring allow rule on L3 Firewall on MX100, Branches ABC cant still see Branches XYZ, am I missing something? also for the port on meraki, should I switch it to Trunk?
... View more
04-01-2020
05:50 PM
Hi @andy0609 , I dont have any rules for this. I tried creating one being my Client VPN segment as my source and destination is the next hop IP but i think i didn't worked so i've removed it.
... View more
03-24-2020
07:52 PM
Hi, can someone assist me on settings needed for Client using client VPN as they cannot reach any host configured under static routes. Below are the things/settings I've done to give you a whole grasp of the picture Client VPN subnet (172.x.x.x) MX Subnet 192.x.x.246 3rd party router (directly connected to MX84 Switch port) 192.x.x.1 192.x.x.254 for LAN, access all configured static routes are accessible but when connecting to Client VPN, ping and connectivity is impossible. I've perform static route but traffic stopped to Meraki Layer 3 firewall rules, I've allowed 172.x.x.x going to 192.x.x.x on 3rd party router, created static route going to 172.x.x.x next hop to 192.x.x.246 (meraki mx) Is there anything I've missed here?
... View more
01-15-2020
12:03 AM
make sure you choose right location based on your cisco account
... View more
11-20-2019
09:37 PM
@jdsilva thank you so much! main concern for this is that even though rules are being applied for that hotspot capable device. connected users use VPN to bypass meraki rules/blocking... maybe perhaps manually checking the client traffic, right?
... View more
11-20-2019
05:57 PM
Hi, I did a research about hotspot within Meraki Community but could find one. I was able to discover clients/BYOD or any device capable of providing Hotspot sharing access for the internet. will MX be able to identify clients behind a laptop or mobile sharing access? lets say be visible on the dashboard? I did choose track by IP address but still couldn't see clients.
... View more
11-04-2019
07:15 PM
Dear All, can anyone suggest proper MX Model for Bank Systems deployment? Can Meraki serve ATM Machines?
... View more
09-08-2019
09:34 PM
Hi @binarydaze thank you for the heads-up... this might come in handy in the future since I will be integrating multiple organizations MX into their respective AD. I have 2 more question, hope that you can give clarification. 1. With integration guide on the Documentation, for me, I might need detailed instruction plus the full requirements as it is not stated. 2. With 2 MX on different sites, can I extend my AD thru meraki via Auto VPN?
... View more
08-12-2019
07:23 PM
Hi @PhilipDAth one last clarification, if I setup the account per user, will the meraki require log-in once connected to any SSID of my MR and will not be able to use the network even if someone knew the password for any SSID?
... View more
08-05-2019
08:55 PM
Hi @Kamome Thank you. so this mean I need to manually whitelist clients? would my existing Group Policies be affected? please enlighten me.
... View more
08-05-2019
08:30 PM
Hi @PhilipDAth thank you for the response. please correct me if Im wrong, based on the meraki documentation, a radius requires a server or AD server? absence of any server that can provide certain certificate for authentication will not make a radius server complete? for Meraki System Manager, I doubt if the client would use it since its only SMB with less than 50 users. Budgetary concern too.
... View more
08-05-2019
06:47 PM
Hi I have this client that requires heavy authentication on wireless devices since they have issues of employees giving out password of SSID to unauthorized clients. Im never new to MX but only more than a year to MR. Upon deploying MR33, I encountered issue(see image below) on MAC based access. -Does this require server or certain configuration to MX? -Do I need a Radius server? further info: -MX64 is in use -2units MR33 -client doesn't have Active Directory
... View more
07-03-2019
07:57 PM
2 Kudos
@RussR Yes, actually we've open up a ticket also... issue is resolve already. @BrechtSchamp @IanH @AjitKumar Thank you so much guys for responding. this gives me a wider idea on licensing.
... View more
07-01-2019
07:35 PM
Hi, thank you for the response and apologies for the confusion. I was able to discover the main issue. My client has 1 MX and 7 MR devices. they renew the license for MX but did not do the same for MR so the dashboard is showing this notification at the top... "This network has been disabled for non-payment. Please contact Meraki Sales for assistance."
... View more
07-01-2019
06:42 PM
1 Kudo
Hi Experts, May I seek your help regarding Meraki AP licenses. Since my client got all of his license expired on AP and after renewing it organization access is not available on the dashboard. Any tips what we can do? do I need to remove the AP and add it back again? Will the dashboard be able to save all the configuration after removing the devices? apologies for so many questions. cant seem to find answers on previous topics.
... View more
05-20-2019
08:49 PM
Hi Meraki Community, Apologies for creating another topic. I was just looking if anybody can share process integrating an AD besides the guide on documentation page? I just need comparison. thank you in advance!
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 2 | 4001 | |
| 1 | 4126 |
