I have Aerohive AP's connected to POE ports on MS switches in my office. I have the standard vLan1 as default and vlan20 configured to be my guest wifi LAN . the guest wifi vlan is configured and as follows 172.22.20.0/24  MX IP 172.22.20.1 Vlan 20.  no policy and no vpn. DHCP config": VLAN 20   run dhcp server   1 day lease   specifiy name server (added two nameservers on my  local and remote network..  boot option disabled.  no other settings.   port connected to Aerohive AP's are set to  Status enabled type access vlan 1 ,voice vlan 20,access policy  open,link   auto neg,rstp enabled forwarding,port sched  un scheduled,trusted DAI disabled,uDLD  alert only,POE enabled,port mirror not mirrord.   The aero hive two other ssid other han gues and they are working   .  difference is that thos ssids are on vlan 1 and have a dhcp relay  to a windows server.   on a note:  the MC vlan 20 dhcp server is not listed n the dhcp & Arp monitor listing ... View more

Short description of our layout. Two sites two mx84's redundant internet connection on both sites several vlans on both sites with different subnets We have a ipo server on site 1 in vlan1010 that needs to port 25 to a secondary ipo server on site 2 on vlan1020 We can telnet test to port 2525 and the server answers.  when we try to telnet to port 25  no answer I've been combing through the mx settings but cant see where that port would have been blocked.   Any suggestions? ... View more