Was confirmed by support ( and many other posts that I missed ) that it is infact a mDNS name.    ... View more

Hi ,   Yes it looks to be available.  https://developer.cisco.com/meraki/api-latest/#!get-network-appliance-uplinks-usage-history   It should provide you the usage of both WAN. ... View more

You are welcome ! Good luck with your exam ! ... View more

Yes , the MS was rebooted and the changes done about 1 hour ago and the trafic is still present. ... View more

I agree. I disabled both settings under MS 14.33 and the MS is still sourcing the ipv6 packets :    ... View more

We only have IGMP Snooping enabled which is a deal breaker to disable and still the icmpv6 packets are being sourced by the Meraki devices:    ... View more

You can't. The only way would be using the cdp/lldp endpoint as stated by sungod but this endpoint won't solve 100% of your cases. ... View more

Hi ,   I suggest that you look at the links that I posted.  The payload cannot be simply :  payload = '''{     "psk": "CAMPUS_GUEST_PSK" }'''   You are missing every other configuration of the ssid. Name , enabled , authMode and more   Also , code examples are provided in the documentation. ... View more

Update :    Took me a minute to find a code '23' :  MR 28.7.1 SSID configured with WPA enterprise and using Cisco ISE as Radius server. Client didn't provide a valid certificate. ... View more

Sorry for the late reply.    What MR firmware are you running ?  Were you able to capture the frame and confirm that the AP is really sending a frame with code '8' ? Could the client be getting a code '23' , upon receving that code simply leaves the AP with code '8' ?   I think you should open a ticket and reproduce the issue and provide them a capture.   EDITv3 : This was solved under 28.7 :  When an Apple client enters an incorrect PSK the AP responds with a disassociation response instead of deauthentication response, resulting in multiple failed connection attempts from the client (Wi-Fi 5 Wave 2 APs)     Might be worth a try to upgrade and test it !   Good luck ... View more

To be honest , I don't understand why and where the ipv6 trafic is sourced by the Meraki devices.    Can't seem to be able to turn that off. Might need to open a case to see if there is no hidden backend options for that. ... View more

Hi,    Your payload is too small.  First do a 'get' ( getNetworkWirelessSsid ) and update the key:value pair of the json content then POST it with updateNetworkWirelessSsid.  I would also recommend using the Python SDK   Examples at : https://developer.cisco.com/meraki/api-v1/#!get-network-wireless-ssid and https://developer.cisco.com/meraki/api-v1/#!update-network-wireless-ssid ... View more

Hi ,   I'm not sure that this can be disabled on a MS. How ever I'm not sure that this is 'flooding' your network as these ICMPv6 router solicitation looks to be sent every 4.2 seconds. ... View more

Aren't all event logs sent to a syslog server ? Or is there some categories that are only available via API / Dashboard ? ... View more

Same. I just looked at the syslogs of FLOW and the uplink is not included   You can see the uplink decision of VPN trafic but not for Internet trafic I'm afraid.  ... View more

I'm really not an expert of the MT family , but looking at the documentation of the MT14 I'm really not sure : https://documentation.meraki.com/MT/MT_Datasheets/MT14_Datasheet_-_Indoor_Air_Quality_Monitor   Maybe someone from Meraki can affirm ... View more

Not sure if this is the right way to report it but this link is no longer working :    https://docs.meraki.com/pages/viewpage.action?pageId=7438344   Thanks ,  ... View more

What MR version and model are you running ?   Any logs in the network Event Log ? ... View more

Hi ,   I don't have any Z3 to this , but is it affecting ALL your Z3s ?   If not , can you take a packet capture and see if the DNS requests sourced by the Z3 are received a valid response ?   If you are sure that everything is fine , I would suggest you to open a case with Meraki so that they can log this issue.   https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Alerts_and_Notifications/Common_Dashboard_Alerts_for_Device_Connectivity#:~:text=DNS%20is%20Misconfigured,-As%20with%20almost&text=If%20there%20are%20no%20firewall,resolver%20on%20the%20DHCP%20server. Section : DNS is Misconfigured ... View more

Interesting... https://developer.cisco.com/meraki/api-v1/#!update-device-appliance-uplinks-settings  means you can configure PPPoE from the API ? If so , would be nice to include in the documentation of PPPoE support : https://documentation.meraki.com/General_Administration/Other_Topics/Support_for_PPPoE_on_Cisco_Meraki_Devices  ... View more

Postman is a really great tool to test individual API endpoints / calls but when you need to script something like in your case , Python is really the way to go.    It is not that hard , you could try on your own with the great documentation that Meraki offers and we could also help you if you encounter issues !   Good luck ... View more