Meraki

crafter · ‎Apr 10 2025

Thanks for the response. I will try analyzing the packet capture and will update.

crafter · ‎Feb 27 2025

Yes. Was able to ping from Cameras > Network > Tools. But I am unable to test from Settings > Sense > MQTT Broker > Edit MQTT Broker > Test Connection > Selected my camera. Note: I doubt that port 8883 is not enabled for outbound connectivity. Is there any way for me to enable this on an MV camera from Meraki Dashboard?? Always it says, Errors connecting to broker Unable to connect to MQTT broker.

crafter · ‎Feb 26 2025

Here is the sample configuration I have done for one of the cameras in my network. Note: I am using Azure Event grid as MQTT broker in this case. When we try to test the connection, all the while we are getting an error in connecting to broker. Need your assistance in resolving this issue.

crafter · ‎Feb 26 2025

Thanks PaulF. I added the webhook as the recipient and started receiving the alert. Cheers..

crafter · ‎Feb 25 2025

You need to remove the -----BEGIN CERTIFICATE----- and -----END CERTIFICATE----- lines, as well as any newline characters. This worked for me.

crafter · ‎Feb 25 2025

I have configured a web hook under Network-wide-> Alerts->Web hooks I even enabled Camera goes offline alert under alerts settings. Now I disconnected the camera for 10 minutes and started monitoring the web hook. I have not received any alert in the web hook. Am I missing something here?

Meraki

Community

About crafter

crafter

Community Record

Badges

Re: Trouble in configuring the MQTT broker for receiving events from a came...

Re: Trouble in configuring the MQTT broker for receiving events from a came...

Trouble in configuring the MQTT broker for receiving events from a camera.

Re: Not receiving camera offline alert to the webhook registered at the net...

Re: Trouble with uploading Ca Certificate for MQTT broker

Not receiving camera offline alert to the webhook registered at the network...