"And later this year you’ll be able to manage and configure your Catalyst 9300 switches in the Meraki dashboard."   So will this be "a la MS390" where the ability to access IOS disappears and configuration is only possible via Meraki dashboard?   Or will be Catalyst 9300 management via Merkai in effect modify the IOS config with SSH into IOS remaining available (e.g. for debugging and "advanced config" not available via Meraki dashboard?)   Richard ... View more

You cant do this on ms switch. On mr or mx you can do it per flow ... View more

I feel just the same every time I try to call the Meraki support. ... View more

I just had the same Issue. I opened a ticket at meraki support and they told me, that it's a bug in 11.27. After upgrading the switch to 11.29, PoE functionality was successfully restored. ... View more

Hi @JoRett    I did a little more research on this issue, Our developers' team are actively working on this issue, however, there are no updates available at this moment. I would suggest you open a case with Meraki support to track the progress of the issue and also to troubleshoot other stack problems you are seeing with the MS350 stack switches.   Cheers!   Raj       ... View more

@GaryShainberg Its solarwinds - orion monitor  (network performance monitor) ... View more

I've considered the MR84 with a stadium antenna for a wharehouse because this antenna has a narrow beam ideal for getting the signal between the racks but we went for the MR42E with the narrow patch antenna fot the initial design. Things might change, have to get feedback about what the enviroment will be in the wharehouse. Acceltext has a great range of products. The AP mount looks great. ... View more

Is that an assumption or you confirmed with your neighbor that he is actively blocking your SSIDs? Pretty sure that isn't 'legal' but since it is France, I'm not certain.   If its being blocked it would be an immediate thing, like you would connect and within a second or two, disconnected, and repeating over and over.   If your connected for 15 minutes or a few hours and then it disconnects, it most likely isn't that.   For sure would want to talk to them to confirm you guys can work together, and I would make your SSID's 5GHz only if you can. ... View more

I'm using 10m 10G Twinax (Cisco SFP-10G-AOC10M) between a MS350 Stack and a C9500 stack.   ... View more

To be honest , and this is also a private meaning...the 11.22 is the most buggy version I ever used. Because there is no way to go back to 10.40, the Beta 11.25 is the lesser evel... ... View more

This hasn't work like expected. Looks like an issue of 11.22. Because there is no good version nor RC I installed Beta 11.25 which solves the problem. ... View more

With regard to spanning tree - use MST on the 6500 and 9500.  Note some old code versions on the 6500 had buggy MST code.   spanning-tree mode mst   I would use trunk ports between all switches.   If the path to the Internet is not using VLAN1 you'll need to configure the management VLAN on the MS via the local status page under uplink configuration. https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page#MS_Series   ... View more