@PhilipDAth I wouldn't buy MS350's or MS250's to support servers/storage is part of it 😉 ... View more

How often are you removing switches from the rack?  ... View more

@PhilipDAth While I don't disagree that there is a difference in latency between 10G-T & SFP+ (around 2.3 microseconds vs 0.3), plenty of environments use 10G-T without an issue. I'd personally argue that 10G-T is more convenient and easier to implement in existing environments. Greenfield environment I'd probably argue the other way.    My main point for the thread is: don't think if you implement 10G-T you'll run into trouble with iSCSI, Exchange, SQL, etc. It can be absolutely fine for most environments.  ... View more

@CarolineS The dividing line is my 2nd favorite change (next to the spaceship of course!). No more confusion about what's a signature and what's part of the post.  ... View more

@ZDonaldson Your sales team can access formal feature requests, which are separate from wishes.  ... View more

@InfinityDrop Are you just seeing issues with client load balancing or other issues as well? The MR 25.9 release notes do specifically call out changes to client load balancing.  ... View more

@RBederianwrote: What was the firmware you guys had before updating? Would like to confirm you guys were not seeing this issue with 25.8?   Was you guys bit rate higher than 12? We were running 25.8 prior to 25.9.    Our min. bitrate is much higher than 12. I don't think that's related to the root issue, I just asked because a support engineer mentioned it to me.  ... View more

@CarolineS Both actually! The individual posts in a thread are quite narrow now, especially because of the "Tags" space within them.  ... View more

I am all for more space themes! Maybe the design team can get a @MerakiDave astronaut going!?   I do like the related content in the threads, but it makes the individual posts pretty narrow. On a 1080p monitor there's quite a lot of white space on both sides.  ... View more

@Krewal & @RBederian What is the minimum bitrate set to on the SSID's you had issues with?  ... View more

I am also only seeing the issue on MR42's so far and have not had any reports from buildings with MR32's.  ... View more

I haven't yet rolled back to 25.8, but it is the previous version that the template was set to and we were not seeing the issue until the 25.9 update.    I did notice in the 25.9 release notes that this was added (not mentioned in 25.8): A corner case would cause AP to stop serving clients. (MR42/52/53/84) ... View more

@Krewal We're also seeing issues with clients either randomly being disconnected or not able to associate (and not seeing the SSID to associate to). More details in this thread (it would be helpful if you could post there as well with what you were seeing while on 25.9): https://community.meraki.com/t5/Wireless-LAN/Windows-laptops-Losing-Wireless-Connection-Firmware-25-9/m-p/14246#M2420 ... View more

Have you had any issues reported again since rolling back?   I have my primary template scheduled to roll back to 25.8 (the version it was previously running before moving to 25.9) on Friday night but have kept a few AP's in a separate network where the issue is occurring. The problem at this point is that I cannot manually reproduce the issue to get a monitor mode packet cap that support wants to see.  ... View more

@Adam They are SUPER small compared to the 21's! I was really surprised when I unboxed them yesterday.    Some quick observations: The status LED is now multicolored like MR/MS/MX devices.  There's no more autofocus in Dashboard (MV 3.4 firmware) - the cameras appear to do this automatically. The cameras can do HDR if enabled! Image quality is definitely improved over MV21/71 (I've been using 1080p enhanced mode which is 3138Kbps@20fps). Export file sizes are significantly larger when using 1080p obviously - something to keep in mind for MV12 deployments! T-rail mounts are NOT included for drop ceilings. Person detection is awesome. Works surprisingly well, even with multiple people in the frame.   ... View more

Both 2.4 & 5Ghz are on but with band steering enabled. ... View more

@RBederian So far the test network is an identical config to our production template which is applied to all other MR networks. The engineer assigned to the case requested this so we can tweak settings on specific AP's to identify a root cause.    I strongly suspect at this point the issue is firmware based however. We'll see if we get any useful data from the AP's in the test network in the next day or two, but if not I'll need to roll the firmware back as this is a major issue for us.  ... View more

We're seeing this as well unfortunately. The issue is definitely only present on Windows, and perhaps more specifically with Intel wireless cards. Macs, iOS devices and Chromebooks are not exhibiting the issue.    This is happening on SSID's with 802.1x enabled with our own RADIUS servers. We're also seeing the devices unable to even see the SSID for a period of time. Updating the Intel driver has not changed anything and both Win 7 & 10 are exhibiting the issue. When this is happening, the AP logs "Client has left AP" numerous times every few seconds. Often times the event log will also show "XX events were not logged". Eventually the client can successfully connect, but the issue reoccurs eventually.    I have case 02459630 open regarding this issue but haven't really gotten anywhere yet besides moving a few AP's to a test network. We'll likely need to roll back firmware very soon as the number of devices with the issue is growing.  ... View more

"Require password to remove this profile" is only valid on-pre iOS 8 devices and macOS devices.  ... View more

It's definitely not implemented at this point.  ... View more

It's probably worth opening a case with Support so they can take a look at what's happening.    My only other suggestion would be to add a regular Google account to the device and make sure that Google Play Services gets updated to the latest version.  ... View more

You could upload your custom profile to Dashboard and have SM push that to devices for you. That should ensure the settings you want remain set and you can push the SM agent as well.  ... View more

What version of Android is the tablet running?  ... View more

@ckwv3 The sizing guide is valid for the MX600, so take a look at that. The MX600 is officially rated for 1Gb of throughput however.  ... View more