I can't tell everything about the case results, but I think this problem is completely solved. We can understand that setting up enroll without logging in works when the Authenticatication (What is this typo? 😉 ) checkbox is empty as shown below. Please correct this typo!     ... View more

@SSDD    I just reset the device and tried enroll again and didn't need login. The dashboard still cannot select the 'deprecated' option and has 'Managed:Use Meraki hosted accounts' enabled, but does not require login. Although the setting and behavior are not being the same, I think the code might have been changed at a level behind the Dashboard. I'll keep an eye on the results of the opened case. ... View more

@BlakeRichardson  I also experienced this problem. This problem is because Meraki has deprecated the function to enroll without authentication at the time of enrollment after erase/reset of the mobile device.   As above, the existing 'disable' setting has been deprecated. Due to this problem, login became necessary after erase/reset the device, I think this cannot be a true ZTP and security is an important issue. However, it must provide users with options to choose from.   Currently, I have opened the case for this problem. ... View more

1. Create a new Settings Profile first to apply different policies depending on the tag.   Systems manager > Settings > [Create new Profile has new TAG]  2. Uncheck 'Allow use of camera' in the path below.   [New Profile has new TAG] > [Add 'Restrictions'] > Cross-platform restrictions > Camera 3. Apply newly created tags to iPad that disabling camera use. 4. Boom! ... View more

Currently, Any MacBooks does not have GPS chip.   MacBook and iPad WiFi without a GPS module are not connected to the Meraki AP, it is checked on the map at the address of the Internet service provider.   If the device is connected to the Meraki AP, you can set the location of the AP to determine the approximate location.   ... View more

There is no way to solve it on SM, and it is difficult to expect APPL to add this feature. It seems to be using the category filtering function of Umbrella or OpenDNS.     ... View more

You can request a DEP registration to the AAR that supplied the iPad. Once the DEP registration is complete, you can see the serial number of these devices in ASM.   You can assign this unit to the Meraki MDM server. https://documentation.meraki.com/SM/Device_Enrollment/Apple_Device_Enrollment_Program_(DEP)   ... View more

What about installing apps using WebClip? If you can not install it using WebClip, we will be able to suspect APK or Android APK file size limitation or else. ... View more

@onebillion  The APK file that does not install is a problem with Android Version compatibility, or App packaging may not be able to have a good fit. When installing an APK on a device that uses a low Android Version, was able to see 'Success' in SM dashboard, but it has often experienced that it is not installed on the device. It seems to be a way to manually install the missing app by running the SM installed on the device.   Or, after pushing the APP on the device in the SM, you should have a client side debugging as described in the link below. https://documentation.meraki.com/SM/Other_Topics/Systems_Manager_Logging_and_Troubleshooting   ... View more

I think the question needs more detail information.   If the device is enrolled through ASM, not be able to use facetime. If the device is not logged in to iCloud, not be able to use facetime. If 'Allow modifying account settings' is disabled, not be able to login iCloud.     ... View more

@kanoga88  If it's not an application update, but an iOS software update, @BlakeRichardson  is correct.   Also, iOS software update has a file size of 1GB or more and it takes a lot of time to download it to the mobile device. If you see "Settings - General - iPad Storage", you can check how much iOS software update file has been downloaded. If the iOS software update command is normally push to the device, this download file is created and the capacity increases. ... View more

@LucaPrins  Allow disk drive access in android app permissions. https://documentation.meraki.com/SM/Profiles_and_Settings/Configuration_Settings_Payloads     Alternatively, you may need to allow cameras or mics in addition to disk access.           ... View more

@adambdc  Looking at the link below, it doesn't seem to be a problem with Meraki SM. https://docs.samsungknox.com/admin/knox-platform-for-enterprise/kbas/kba-369-cannot-install-samsung-gallery-android-11.htm It seems to be because the samsung gallery app is no longer available in the Google Play Store.     ... View more

@ISF-Dessilly @I am not sure what caused this problem I think it would be correct to enroll the device again. First of all, do not remove the device from the dashboard, do 'erase devlce' on the device page in the dashboard and enroll again. If you cannot control the device from the dashboard, you will have to initialize it using the Apple configurator.   Yesterday, My customer deleted a profile in lost mode and was unable to manage the device. I used the apple configurator to 'erase all content and settings' it.   ... View more

@Inderdeep  Even if query the "fields=location" using API, the coordinates are not displayed. Only addresses information that can be located are displayed.   The address must be checked from the coordinate value, but I am wondering if there is a way to solve the problem of showing only the address.   ... View more

I've tried it before, but it wasn't possible. If you look closely at the policy list of the Chrome browser, there is no text that iOS is supported. How about using Webclips or distributing html containing bookmark list in Backpack?   ... View more

Sorry Koops. There seems to be confusion in my memory.   Like you, I could see the device in DEP, but I couldn't search by serial number. I couldn't see it right from the'devices' screen, but I could see it by changing to'General -> DEP' After 2-3 hours elapsed, the devices appeared in the device list, and the serial number was also available for inquiry. Maybe you also look up normally by now   ... View more

I have experienced in network with 3,000 DEP devices. I did not see 1 device in the Device list.   Theoretically, it is not exactly correctly, but after the 'full sync' on DEP, I was able to confirm that 1 device lost in the Device list came back.   Try the 'full sync' at the upper right corner of DEP. ... View more

Oh it's a good news.   I tried to test the post that the problem was fixed. Even if 'Delay OS Software Updates' is not set, my iPad is always set to iOS updates to a 1 day delay I have been disabled again after enabled this setting today. The problem was solved as dfurasek said.   This can be checked directly in the Profile's Restriction pane in the iPad.   @dfurasekIf 14.5 update is released this month, you will be able to update immediately! Thank you.   ... View more

If itunes login is requested when installing the applications, it occurs when the registered apps 'Purchase method' is 'do not use VPP'. I think the solutions would be to select 'VPP device assignment' for the 'Purchase method' of the app that requires itunes login and try 'app sync' again.   Or, 'Vpp sync' may not work normally in the VPP page. Try 'force sync now' by pressing 'sync' at the top right of the VPP page. ... View more