Hi, One Idea could be, You may tweak the "Column List" by clicking the "+" symbol on top right hand side under Network-wide->Clients. [Screenshot attached for reference]     Thereafter  you may download the list as CSV file. Filter the content in an Excel Sheet as desired. Copy the List of MAC Address you need to block and Apply "Blocked" Policy for them. [Screenshot attached for reference] You may also block devices automatically by assigning a "Blocked" group policy on the basis of "Device type" under Wireless->Access Control.  [I am not sure if this what you want though] [Screenshot attached for reference]   I do not see an option of alerting the blocked devices. However you may display a custom blocked message under Network-wide->General for the Blocked Devices. [Screenshot attached for reference]   ... View more

Hi,   I understand @jdsilva has already highlighted the process for you however you may also refer to the following Url documenting the step by step process for "Assigning a Static IP Address" to Switches.   https://documentation.meraki.com/MS/Other_Topics/Assigning_a_Static_IP_Address     ... View more

Congratulations Team. ... View more

Hi, Most of the time the Local Status Page shall display the reason. Why a device is not able to reach the cloud? Could you please re-verify the following.   1. Try factory resetting the device. 2. The device is successfully added in the dashboard. 3. The upstream firewall is not blocking reach-ability to cloud. 4. The Default VLAN1 is used for management traffic. 5. The up link port is a Trunk Port. 6. Port Speed (Uplink Port) at the Local Status Page. They should negotiate.   Hope this helps you.   ... View more

Hi As you know MR32 is EOS product. The nearest version is MR33. There are a few minor differences between them which I am aware of Like MR33 is Wave 2, 802.3af, small size etc.   MR32 is a good product. However for any new entry level purchase obvious choice shall be MR33.     ... View more

Hi, This is strange. Could you try upgrading the firmware to Latest Stable? If already not.   ... View more

Hi, Following is my understanding. I believe MS350 supports only "Physical Stacking". This means we need to use the Stacking Ports at the Back of the Switches. To Use these Port we need to buy "Stacking Cables".   Kindly check the below url displaying the compatible accessories. https://meraki.cisco.com/products/switches/accessories   The Twinax cable can only be used in SFP+ ports to interconnect switches as "Uplinks" and also for  "Flexible Stacking".   You may refer to the following page (If you have not). This has answers to most of your questions. https://documentation.meraki.com/MS/Stacking/Switch_Stacks   ... View more

Hi, The Group Policy in Meraki can be applied at various Levels ie. MAC, IP, VLAN, AD Groups. Please check the following Url for the "order of priority" of the policies if applied at Multiple Levels.   https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Troubleshooting_Group_Policies#What_is_the_order_of_priority_for_Group_Policies.3F   Also make sure to select "Full List" under Security & SD WAN -> Content Filtering -> URL category list size.   ... View more

Hi, This seems fine to me. Hope you have allowed 443 and 80 (if required) for other services and general browsing. ... View more

Hi, I understand MX do not offer DNS Services Adding MX Local IP in  DHCP NS List shall not be of any help. Hope your AD DNS server is working good to resolve domains.    You may follow @PhilipDAth instructions on this.   Also consider  verifying L3  L7 Content Filtering Traffic Shaping rules and Firmware version. ... View more

Hi, Kindly check the following Url. https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Connection_Monitoring_for_WAN_Failover   Excerpts from above Urls suggests the below.   Note: If the MX is using the non-preferred uplink as the primary and the preferred uplink comes back online, the MX will wait about 15 seconds before switching the primary uplink to the preferred one. This is to prevent the primary connection from flapping in the event of intermittent failure or an unreliable link.  ... View more

Hi, I have not faced  "Whitelisting Policy" not working with Meraki Wireless. I did faced Group Policy issues in Meraki Wireless + Appliance network which was shorted out later.   I never got an opportunity to Manage 1000+ WiFi user base though. If not ISE / MS you may consider FreeRadius / MikroTik.   You may start with http://www.freeradius.net/. Install it on a Windows Machine and check if a Radius solves the issue. However Lets wait for some more suggestion from Community Members.     ... View more

Hi, For a basic level of "users on boarding process" Meraki Radius seems to be fine. Any how you need to manually type in the MAC Address in either of the solutions.   In-case of Meraki you can specify the desired policy on the device while adding them on to the Dashboard. Screenshot attached for reference.     For a better functionality you may consider Cisco ISE. ... View more

Hi By default if there are 2 MXes in one network. One will be Master and another will act as Spare. (HA). If you do not want HA functionality for your network. You may remove one device (Spare in your case). Once you remove the Spare Inventory will display that as available and you can create a New Network with this MX. You can add Switches using the similar method from the inventory. Also Switches and Access Points can be moved from one network to another network. ... View more

Hi Laxmikanth The option is available under SD WAN and Traffic Shaping. Please select Internet Flow Preference. Define the source, destination and WAN Interface. You shall be able to achieve the desired results. ... View more

Hi Marc Thought for some time but couldn't get any ideas. I am not aware of any option to deactivate network. I believe you may have to leave it as it is. May be you can rename the network with a meaningful text like "Under Maintenance" or something better.  ... View more

Hi Stu, To upgrade the Firmware one should have "Organization Wide" admin Rights.   You will see "Firmware Upgrades" option under "Organization".   Screenshot attached for reference.     ... View more

Hi,   I am not sure as have not tested but considering the MX routing behaviour I believe NAT/PAT shall be over-ridden by the VPN Default route.   https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior Route Priority Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows: Directly Connected Client VPN Static Routes AutoVPN Routes Non-Meraki VPN Peers NAT* However may be we shall wait for inputs from other community members. ... View more

Hi Paul,   I understand this shall not be a challenge.   Kindly check the following Url. https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Settings#Non-Meraki_VPN_peers   Following section is an excerpt from the above Url Non-Meraki VPN peers You can create Site-to-site VPN tunnels between the MX appliance and a Non-Meraki VPN endpoint device under the Non-Meraki VPN peers section on the Security & SD-WAN > Configure > Site-to-site VPN page. Simply click "Add a peer" and enter the following information: A name for the remote device or VPN tunnel. The public IP address of the remote device. The subnets behind the third-party device that you wish to connect to over the VPN. 0.0.0.0/0 can also be specified to define a default route to this peer. The IPsec policy to use. The preshared secret key (PSK). Availability settings to determine which appliances in your Dashboard Organization will connect to the peer. Note that if an MX is configured with a default route (0.0.0.0/0) to a Non-Meraki VPN peer, traffic will not fail over to the WAN, even if the connection goes down. ... View more

Hi,   Do check the following Url at the bottom of the page it is nicely listed down about all the settings that shall be cloned. https://documentation.meraki.com/MS/Other_Topics/Switch_Cloning   You may also watch the following video in case you wish to understand more on replacing a switch out of a stack. https://www.youtube.com/watch?v=BrXCNcnJf4c ... View more