How is the Minimum bitrate configured in your RF profile? Is Band Steering enabled? If yes, try disabling it. ... View more

@ChrisDongen Users are registered at the organization level and not the network. So I believe that the best way would be to consult the users at the organization level and check the network to they have access privileges. ... View more

You can use any other router from any other manufacturer and you won't have any management issues. ... View more

Sorry, I thought you were talking about the MX. The GX20 has only one WAN port. ... View more

What version are you running? ... View more

Do you want to have a 2nd WAN on MX correct? You can connect MX on any switch that you want, and It will work without problem. ... View more

Hi, @jfitz0715 you can create a new network and just clone the configs.    https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Cloning_Networks_and_Organizations_in_Dashboard ... View more

@VinnieProsacco  could you please give us more pieces of information?  ... View more

It's a little strange, can you try to allow this URL list?   https://support.google.com/a/answer/2589954?hl=en ... View more

You have to configure an access policy in your radius server using a smart card (Microsoft NPS) authentication:   https://documentation.meraki.com/MS/Access_Control/MS_Switch_Access_Policies_(802.1X)   https://documentation.meraki.com/MR/Encryption_and_Authentication/Creating_a_Policy_in_NPS_to_support_EAP-TLS_authentication ... View more

The switches have to connect  The switch must connect to the internet at least once so that it can download the settings and update the firmware after that, it works even without an internet connection, but to make any future changes it must be online in the dashboard.   https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Meraki_Cloud_Architecture#:~:text=Meraki%20uses%20an%20event%2Ddriven,data%20collection%20and%20configuration%20deployment. ... View more

@Abdelhak , well, I'm not sure about the first question, but about second is yes, because the switches will "download" the configurations applied on the dashbord.   About the first one, do you want to have two separated physical networks but just have one Wan internet connection? The switches don't need to have a public IP, they can use a private IP, they just need internet access. ... View more

Access points intended to form a wireless link or mesh together must be within direct line of sight of each other. Wireless bridges running version 27.X or below only support a single VLAN. If support for multiple subnets is a requirement for the deployment, a layer 3-capable device will be required. MR repeaters will only send/receive   untagged traffic   on its wired interface regardless of the configuration of the SSID in use. Starting 28.1,   Multi-vlan support   was added. By extension, wired clients across the mesh link do not support the use of VLANs applied by   Group Policies.   https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Extending_the_LAN_with_a_Wireless_Mesh_Link ... View more

It should have worked. Have you tried to import the MIB for your PRTG? ... View more

Have you enabled SNMP v3 on Organization > Configure > Settings > SNMP?     ... View more

Nope, you can create 16 SSIDs yet, but It's not a best practice.  😁 ... View more

@Ryan_Miles Will It show the fixed IP to? ... View more

@Djsky123if you want I can test it with your Facebook page without problems. ... View more

By the way, make sure that you have configured a location on your page and the Workdays. ... View more

@Djsky123  I performed a new test with MX and It worked fine. Here is my configuration: I created a new VLAN and performed an Access control configuration setting for my Facebook Page, and I created an open SSID and set it to use my new VLAN.             ... View more

I tested on MR but I can test with MX. ... View more

Give me a minute I will test it. ... View more

Can you try to perform the same test on this URL? https://developer.cisco.com/meraki/api/#!get-organizations ... View more