@CarolineS Thanks for looking into it. I just tried to edit a post that I just created and saw the same result. I clicked the dots then Edit Reply and nothing happened once Edit Reply was clicked. ... View more

I feel special.. I got the GOATs of the forums responding to this silly ask. Thanks all for your input. I need to get approval from my company to get a couple of long-term testers and get this tuned. Main SSID 1 (including IoT) | WPA2 | Identity PSK without RADIUS | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Adaptive <-- Disabled now. WiFi6e test SSID 2 | WPA3 | Preshared key | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Disabled Secondary Testing for PPSK SSID 3 | WPA2 | Identity PSK with RADIUS | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Disabled Just like @PhilipDAth I have 11r and B/S disabled, but I had that disabled on the secondary SSIDs now that is changed on the main.  @alemabrahao  I'm not sure how I overlooked the bit rate I had that set at 11Mb/s vs 12Mb/s That being said thank you all for responding and I will follow up once my new units come in. As of now, I am back on my MR44's. ... View more

I was trying to make the edit within seconds up to 2 minutes of the post.  ... View more

I just tried to edit my reply to a post I started. If I go to edit my original post I can do that, but when I click edit on my reply nothing happens. On other forums, I've seen the behavior when someone replies to your response that response is locked, but in this case, no one has responded as of yet.  ... View more

@alemabrahao Sure.. Thanks for the assist I didn't want to bother you guys with a full support thread, but hey what would it hurt..? So currently I have the following SSID 1 | WPA2 | Identity PSK without RADIUS | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Adaptive SSID 2 | WPA3 | Preshared key | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Disabled SSID 3 | WPA2 | Identity PSK with RADIUS | 2.4-20/ 5.0-80 (I tried 40 still the same) | 802.11r Disabled   Radio Channel 2.4 set to auto but also locked to 1 / 11 based on utilization Channel 5.0 set to auto but also locked to 44 / 157    The coverage is a 2-level 3500 sq ft home.      ... View more

Just popping in as a datapoint on this topic. Meraki is pushing to get more IoT devices into the market.. having this option even with licensing would make it easier to accomplish this. If an admin needs to monitor a room or space apply one of the IoT licences to the AP, or if a space that needs to be monitored that doesn't have an AP then install a standalone unit. ... View more

  So working with AWS when I had the VPC peering in place the routes were good tcpdump showed the traffic hitting the VM and the VM sending the traffic back. What was noticed is the next hop was not identifying the VMX as the next hop causing the packets to drop. The fix for me was to place transit gateway in place and then configure the routes in the TG/ each VPC / and the vMX. As on this moment I have traffic processing through the vMX to my VM.    ... View more

I'm running across this same issue. I have my vMX in a hub network with multiple VPCs connected to the hub VPC. Like others I can ping between the vMX and any device in any other VPC, but the return traffic from AWS is not be generated back to an on site subnet.  ... View more

Congratz to everyone on the board. Your knowledge and assistance only make the community better. ... View more

I just ran across this post... It's been a few years and I wanted to see how things are going with your network?  ... View more

I have a feeling the 250s will happen soon. ... View more

@cmr Do You have any details to share on your testing? ... View more

Just pushed this to an MX75 and setting up an upgrade to MX68 for later tonight.  ... View more

Overall I like the new look and feel. Most of my thoughts are around alerting and notifications, but they are wishlist items that I am not even sure should be a thing. So before I list those items out I would like a day or so to figure out how things are now. Great job and I love the side-pane drop downs.  ... View more

Good luck!!! You might want to have an extra cup of that tea or coffee.. ... View more

You're good @PhilipDAth. for me I never set the vMX DNS until I see the unit come up. This is my method doesn't make it right. Once it comes up I point DNS 2 to my internal DNS server and DNS 1 to an external server.    The tip I gave @JGrantB was due to an issue I ran into a few months back when I had DNS 3 set to 8.8.8.8 on the VNET. ... View more

Just to verify when you say you set the DNS on the V-Net to 8.8.8.8 was it on DNS 1 or 2? The reason for this question is if it's set to 3 or lower the vMX will not honor any DNS below 2. ... View more

This needs to be an option at some point. ... View more

I hope Cisco is able to respond I know layoffs happened a couple weeks ago. But for those that are looking for an option, you can look at TP-Link, Unifi, Aruba, and Grandstream. If you can afford some licensing Engenius and Netgear are options.  ... View more

@Brennan_Martin Thanks for responding to this post, but like others have stated limiting the ports to 30W and marketing them as BT switches (even if it understands BT) feels a little less than premium, or not being honest with the customer. Cisco / Meraki has multiple APs that require more than 30W of power and if the admins pair those APs with this switch then that admin will not get the full function of that AP.  ... View more

Thanks! I see that document was just updated a few days ago.  ... View more

Ooof.. It feels like the known issues are starting to outpace the bug fixes. ... View more