warm spare is not active active. you could run both providers to both mx's if you have enough IP addresses between the provider and your MX's . https://community.meraki.com/t5/Security-SD-WAN/Does-MX-device-can-support-dual-active/m-p/64242#M16273 so the WAN ports can be both active, but not Both MX's (in warm spare) at the same time
... View more
Note: Layer 3 firewall rules configured in group policy are stateless, and corresponding rules may be required for return traffic. assuming i read this correctly, then its only outbound . but most sessions need 2-way traffic to establish so it would still be blocked in many cases..
... View more
https://documentation.meraki.com/MR/Group_Policies_and_Blacklisting/Using_RADIUS_Attributes_to_Apply_Group_Policies https://emtunc.org/blog/02/2014/vlan-tagging-per-active-directory-group-with-meraki-access-point/
... View more
yes that is what the spec datasheet says. so you bought the wrong product. maybe you can buy a small (8 port?) switch and connect that for the half duplex clients
... View more
Network-wide > Configure > General https://documentation.meraki.com/MR/Other_Topics/Manually_Integrating_Cisco_Umbrella_with_Meraki_Networks
... View more
you could prepare a script to undo you changes using the API. Meraki should make some kind of snapshot/save state where you can revert back to.
... View more
its already for a long time in the change logs. i dont know if this is correct... why would it work in standalone but not in warm spare... did someone test this?
... View more
your ssid is in bridge mode? your coreswitch connects Wi-Fi AP's? or did you add the vlan to all switches. does the coreswitch send the related dhcp packet to the AD , and the AD receives the dhcp packet?
... View more
looks more like a message regarding a mx from another network in your org? i would call support or create a case on the dashboard at help> cases.
... View more
you can have 12 cmna gear/ licence in one network and they can be extended by cmna renewal. but you still need the licenses. your normal 3 dont cover 12 devices.
... View more
when this error is seen make some captures to see of the mx ip fails on any of these checks https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Upstream_Firewall_Rules_for_Cloud_Connectivity
... View more
https://community.meraki.com/t5/Switching/Disabled-Switch-BAD-DNS/td-p/32382 so maybe check the logging of the other vendor switches for any clues.
... View more
