Hi,
would anyone be able to help me with my flat network?
im having issues below
MX Subnet - 192.168.0.0/24
MX IP - 192.168.0.246
what are you using for you next hop gateway for the 192.168.100.1 subnet?
The next hop would need to be 192.168.0.x.
What device is providing a route to this remote subnet.?
192.168.100.1 is my MPLS router
just to give you a more grasp of the issue. I'm replacing old Juniper of my client with Meraki. they do have 2 service provider with MPLS.
in Meraki I can directly input all the static routes needed to the 1st MPLS router which has 192.168.0.1 (also my next hop) no problem with this route
but with 192.168.100.1 I need to pass Juniper with 192.168.0.254 address, now on meraki the next hop is juniper instead of directly MPLS router
then you need also 100.x subnet on meraki and trunk them both to the juniper.
otherwise 0.1 is your only next hop
Hi @ww
thanks! this is what im thinking, but, MX84 is configured with single LAN do I need to create VLAN's?
Yes, you do need to use VLANs to define multiple subnets in the MX.