Meraki

SoCalRacer · ‎Aug 31 2020

Have you verified the cert is good? Have you checked the time is correct on the iPad before deploying?

SoCalRacer · ‎Aug 31 2020

I haven't had issues with it. Just to double check have you used the incognito tab to test? Also possibly flush DNS on your local machine. Try accessing from a different computer possibly with a different ISP/public IP.

SoCalRacer · ‎Aug 27 2020

Looks like the newish/awesome MG devices are missing from the cost calculator. https://meraki.cisco.com/buy/cost-calculator @CameronMoody @MeredithW Could you find someone to help update?

SoCalRacer · ‎Aug 27 2020

As far as I was aware there was never a change, but it has always been that until the device checks in then the option to change the uplink wasn't available.

SoCalRacer · ‎Aug 27 2020

Looking through v0 and v1 I was unable to find an endpoint that was usable to determine license used in co-term models. Maybe @Melissa or @John_on_API can get us an official answer?

SoCalRacer · ‎Aug 26 2020

Where did you get the switch? I assume it is not new out of the box. Have you added the device to your inventory? Possibly do a factory reset. https://documentation.meraki.com/zGeneral_Administration/Support/Resetting_Cisco_Meraki_Devices_to_Factory_Defaults If you don't want to do the reset, check the local status page for issues like possibly static IP set https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page If DHCP is on and its behind the MX, then check to see if you can see it in the dashboard client list.

SoCalRacer · ‎Aug 26 2020

Probably not the answer you want to hear, but USB works too 😁

SoCalRacer · ‎Aug 26 2020

1. BBC London Radio 2. 10/5/25 3. Phishing Attack 4. Don't Panic 5. What is the answer to the ultimate question of life the universe and everything? 6. Marvin the Martian 7. Deep Thought 8. Heart of Gold 9. arthur.dent@human.from.earth 10. Douglas Adams

SoCalRacer · ‎Aug 25 2020

I believe the recommended method for this deployment is one network for the MX and main office. Then one network for each branch/satellite office with one Z device. Then utilize AutoVPN back to MX. This should keep your security features if setup correctly.

SoCalRacer · ‎Aug 24 2020

What model MX is this? Is the MX new out of the box? You may want to do a factory reset on it just to ensure the WAN is set to DHCP.

SoCalRacer · ‎Aug 18 2020

Do you have access to the dashboard? Are these wireless routers MR devices?

SoCalRacer · ‎Aug 13 2020

Both of these kind of sound like a nightmare. I would say benefits to 18 networks is that you have alot more control, but its going to be harder to manage alerts, support, etc. 1 network seems also bad from the support troubleshooting where they are and such I would say there is a mix between the 2 that would work. A different way to create 2 or more networks Like North or South or Floor 1 and Floor 2 or maybe 100 and 200, 300 rooms.

SoCalRacer · ‎Aug 12 2020

I assume a reboot on the switch has been done and firmware is up to date?

SoCalRacer · ‎Aug 12 2020

I would check the LAN IP settings on the switch, make sure it got DHCP from the MX and 2 DNS servers configured, preferably the primary on LAN if available

SoCalRacer · ‎Aug 12 2020

Is the MX doing DHCP? Is the Switch getting DHCP?

SoCalRacer · ‎Aug 12 2020

Those are static overrides like on a client computer. Depending there the client is getting DHCP from then that will determine the DNS server used, otherwise fall back to static assignment

SoCalRacer · ‎Aug 11 2020

Similar to to iDRAC or iLO (Lights out Management) on Dell/HP servers, it's a dedicated port/VLAN to manage the device.

SoCalRacer · ‎Aug 11 2020

I will say this, we dropped Ubiquiti as our preferred network stack years ago and haven't looked back. Ubiquiti Support = Forum only Meraki = 24/7/365 With Ubiquiti if you want to spend tons of time supporting it and working out kinks and doing all of that alone, to save some money then it is a good fit. Good support/warranty is worth it's weight in gold when you have a major issue.

SoCalRacer · ‎Aug 11 2020

@PhotoJoseph wrote: Oh man… this is disastrous. My ISP is running gigabit soon. I'm almost afraid to ask, but what model can handle that? Thanks for, uh, confirming the ruining of my day 😭 MX250 - Just did one of these for a client

SoCalRacer · ‎Aug 11 2020

That is the same limits I see for MX64 and is showing in the below link. https://meraki.cisco.com/lib/pdf/meraki_whitepaper_mx_sizing_guide.pdf

SoCalRacer · ‎Aug 11 2020

Since you can only have 1 MX per network you will probably want to do a swap. https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Different_MX

SoCalRacer · ‎Aug 9 2020

https://community.meraki.com/t5/Security-SD-WAN/Guide-Client-VPN-Troubleshooting/td-p/72348 Also check windows event log on client to determine error code.

SoCalRacer · ‎Aug 5 2020

I would try a couple things 1) DHCP reservation 2) Turn on LAN access in the firewall rules of the SSID 3) Turn on Bonjour/mDNS forwarding 4) Setup a test/temp SSID just for connecting your phone/home device to help you rule out issues.

SoCalRacer · ‎Jul 2 2020

Shouldn't Meraki support be able to see the device overheating?

SoCalRacer · ‎Jul 2 2020

@Network-dad wrote: For just an small non Meraki in room AP I travel with one of these https://amzn.to/3glwRuC For a Meraki solution I travel with a Z3 https://meraki.cisco.com/product/security-sd-wan/teleworker/z3/ Pretty much my exact recommendation, also my preferred device is Z3C for travel since I use the T-Mobile SIM in it all the time. Screw Marriott Wifi! I usually bring a chromecast device and then I can stream pretty much anything I want and not be on the hotel wifi and I get wired access if needed. Only downside is TSA looks at you kind of funny.

About SoCalRacer

SoCalRacer

Community Record

Badges