Hi @The_Machine , was in my first initial response, just didn’t include the HW element. You correct on both counts, the MS120-24HW and 48 port equivalent are non PoE and have no fans.
... View more
Hi @The_Machine , just re-Reading the datasheets and the MS120-8, 8LP and 8FP are also fanless https://meraki.cisco.com/lib/pdf/meraki_datasheet_ms120_compact.pdf
... View more
Hi @The_Machine , the fanless switches are the MS120-24 and MS120-48, so the non PoE switches You’ll also need the associated licenses LIC-MS120-24-1YR, 3YR etc LIC-MS120-48-1YR, 3YR etc
... View more
Hi @Puyi @that’s not what’s being reported in the dashboard. I would never take what the end users saying as being correct until you can prove otherwise
... View more
Looks like the dashboard is reporting multiple clients failing to associate due to incorrect password! Confirm the password is correct on the SSID or set a new password and try again. Maybe also “Forget” the SSID on the client and try re-associating
... View more
Hi @MakaraMEAS What tools do you have at your disposal, MX, Umbrella, MDM? Deploying one or two of these would help address your query. have a look at each.
... View more
No experience on such a deployment but if you’re at the threshold and hit technical issues then Meraki support will be limited. i believe you’ll be fine unless you start deploying out more MX’s to the deployment and take the design way over its thresholds.
... View more
Hi @mlowe4 was just looking for this link, post your question here also: https://community.meraki.com/t5/Off-the-Stack/Submit-your-questions-for-The-Meraki-Quarterly/m-p/82217#M2737
... View more
Cheers @CptnCrnch Well done to all those recognised especially @Jwiley78 and @CN Keep busy, keep healthy, keep safe and .....keep posting
... View more
Paragraph taken from the Meraki documentation: "Please note that upon first-time bootup and connection to the Meraki Cloud, an ethernet WAN connection must be used to download the initial configuration and get the device online the first time." https://documentation.meraki.com/MX/Cellular/3G%2F%2F4G_Cellular_Failover_with_USB_Modems
... View more
Hi there, 1. you’re correct in your understanding in that the MX initially has a single IP Subnet and therefore a single DHCP scope. For more you’ll need to create multiple VLANs and therefore Trunk these to the downstream switch. Why would you have to create a DHCP server and DNS on the network? You can create the DHCP scopes on the MX and also utilise the upstream DNS.
... View more
