Meraki

NolanHerring · ‎Jan 15 2019

Warm-Spare mode is only supported for models of the same type (MX250 and MX250 for example). You can't use the MX84 as a warm-spare for the MX250. Here are some links that might help you on the other tasks: http://www.ifm.net.nz/cookbooks/meraki-backup.html https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Different_MX

NolanHerring · ‎Jan 15 2019

Validate trunking between stacks and your core is allowing the correct VLANs etc. Where is your DHCP server running?

NolanHerring · ‎Jan 14 2019

Can you provide a screenshot of your License Info page within your dashboard. Will help us get a better picture.

NolanHerring · ‎Jan 10 2019

I was worried I would be held accountable, now I can relax and create another notch in my belt 😃

NolanHerring · ‎Jan 10 2019

The only thing I know of is if you were to block the actual public IP addresses that APPLE uses, but doing so I'm pretty sure you would also block everything else like App Store and what not.

NolanHerring · ‎Jan 10 2019

Pretty sure you won't be able to do that via L3/L7 firewall rules. I think you can only do that via control over the device restriction settings via SM for example.

NolanHerring · ‎Jan 9 2019

FYI since I just noticed that you have 'Default Route' checked. This means that the Z3 will do Full-Tunnel. So any local internet traffic will also traverse the VPN. If you uncheck that, internet traffic will leave the internet local and only traffic routed for internal will go over the VPN

NolanHerring · ‎Jan 8 2019

Are you split-tunneling or doing full-tunnel for the VPN once its connected?

NolanHerring · ‎Jan 8 2019

Correct Phil Was just referring to his gripe about the licensing model being ORG wide. As this was something I also found out the hard way =( For reference if you need it @Happiman https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Appliances_in_Different_Organizations

NolanHerring · ‎Jan 8 2019

You can use a separate ORG to separate the license portion but I know what you mean. It does seem silly

NolanHerring · ‎Jan 8 2019

Only two options available (enterprise vs advanced) but keep it in mind that its org wide so if you commit to advanced, then all your future MX purchases will need advanced license

NolanHerring · ‎Jan 8 2019

Blame my G/F for me gaining more weight than I wanted Lose the weight Not get angry at my cat every single time he meows Hold him close and never let him go Renew my CCNP-W Get the CCNP-R/S Have another successful wireless deployment of my 5th million square foot warehouse build (MR74 this time yay!) Learn Python so that I can actually use it for work related tasks like instantly and quickly configuring hundreds of ports on cisco switches the same way by using CDP/LLDP data Track down and hunt a Meraki gnome in the wild

NolanHerring · ‎Jan 8 2019

Here is a good link if you want to review/compare each models specs and capabilities https://meraki.cisco.com/lib/pdf/meraki_datasheet_mx.pdf

NolanHerring · ‎Jan 2 2019

WOW time flys when your on vacation lol. Thanks again although I honestly feel like I barely contributed this past month =(

NolanHerring · ‎Jan 2 2019

Shameless self plug, but this should help get you going. ^_^ https://nolanwifi.com/2018/10/28/meraki-api-where-do-you-start/ As for using a scripting program like Python to tie into it and all that jazz, I can't help with that just yet.

NolanHerring · ‎Dec 28 2018

You need to configure the access-control setting for each SSID to have the VLAN you want it to have via the Bridge-Mode option. You'll see an option to use VLAN tagging, so enable that and then you can choose what VLAN ID to use. Then when a client connects to SSID1, he'll get put on whatever VLAN you have setup. You will need to ensure that the ports that each AP connects to has all the VLANs allowed.

NolanHerring · ‎Dec 26 2018

Same issue here

NolanHerring · ‎Dec 19 2018

HA ! I use that line all the time when it gets loud in the office AND THE ROWERS KEPT ON ROWING AND THEY SHOWED NO SIGNS OF SLOWIIIIIIIIING !!!!!!! RAAAAAAAWR I hate open office concepts lol

NolanHerring · ‎Dec 19 2018

Decided to take a lunch break and now I regret it lol.

NolanHerring · ‎Dec 18 2018

@Sam_Clements Don't you already have some Sam ! RAWR

NolanHerring · ‎Dec 18 2018

Is he lost again? I honestly can't tell from the multiple threads

NolanHerring · ‎Dec 18 2018

@CarolineS Am I the only one who would pay money for these things?

NolanHerring · ‎Dec 17 2018

Another gem that is hidden from us mere mortals Thanks for letting us know Phil ^_^ Curse the hidden menu !

NolanHerring · ‎Dec 13 2018

My desk always felt empty. Now I know why.

NolanHerring · ‎Dec 13 2018

What about 20,000 clients lol. Just realized it was 5 calls per ORG not NETWORK so that changes things a little lol. Out of curiosity as I really never dabble with scripting etc., if you were actually setting something like this up, what/how would one go about doing something like this to make it automated etc. Assuming some sort of server is required running scripts all the time and those scripts taking action on the API data its pulling etc.

About NolanHerring

NolanHerring

Nolan Herring

Community Record

Badges