I recently completed a switch replacement under the MS225 replacement action. Six switches broken in to two stacks of 3 each. Since the replacement, about a half dozen endpoints will not get a good IP address via DHCP. I've confirmed that the ports they are on are assigned to the correct VLAN, and they will connect if manually assigned an IP address. Clients are a mix of Windows 7 and Windows 10. I have tried all of the Windows troubleshooting tricks that I know of (netsh int ip reset, netsh winsock reset, ipconfig /release and /renew) and they still won't get anything from DHCP except for an APIPA IP address. If anyone has any thoughts or suggestions on what could be causing this, I'd love any help anyone can provide.
Thank you!