Splash page Username syslogging

[brianpmcp]

We have a requirement from the Customer to log Splash Page logins based on the Radius Username and the IP address associated. The current solution sends this to a syslog server. The Meraki syslogs dont seem to contain this information even though the splash logins page has the required info.

Any potential solutions to this?

[PhilipDAth]

The RADIUS server normally logs this info.  Have you checked its authentication log?

[brianpmcp]

Its a bespoke server which the customer controls, we can ask the question. The current provider can syslog this info with their Aruba controller.

We will be using ISE for Corporate Authentication. I don't think you can use an ISE splash page with authentication proxied to the other radius server though.