New Wireless Stable MR31.1.6

[rhbirkelund]

mportant note

• Wi-Fi 5 Wave 2 MRs support - This version and subsequent MR 31.x.x are only supported on 802.11ax (Wi-Fi 6) and newer MR models. 802.11ac Wave 2 and older products will only upgrade to the backup version (MR 30.7.1) if they are in networks configured for MR 31.x.x versions, and thus, the new features will not be available. The bug fixes listed below will also not apply to Wi-Fi 5 Wave 2 and older MRs. (https://documentation.meraki.com/MR/Other_Topics/Cisco_Meraki_MR_Firmware_Restrictions_Overview_and_...)
• Includes support for Wi-Fi7 APs (https://documentation.meraki.com/MR/MR_Overview_and_Specifications/CW9176I_%2F%2F_CW9176D1_Datasheet, https://documentation.meraki.com/MR/MR_Overview_and_Specifications/CW9178_Datasheet)

Bug fixes

• General stability and performance improvements
• MR56 ethernet port flaps occur when connected to C9300-48UN(V04) at 5Gbps speeds
• MR57 ethernet port flaps occur when connected to MS355 at 5Gbps speeds
• MR46 not responding to Probe Requests from clients
• Channel & power not configurable via LSP on CW9163E APs
• Wildcard NAS-IPv6-Address AVP sent on config change (Wi-Fi 6, Wi-Fi 6E APs)
• NAS-IP-Address discarded (Wi-Fi 6, Wi-Fi 6E APs)
• RADSec authentication failures (Wi-Fi 6, Wi-Fi 6E APs)
• Sporadic packet loss & instability on Layer 3 roaming & Teleworker VPN SSID's (Wi-Fi 6, Wi-Fi 6E APs)
• DHCP offer is not forwarded if broadcast flag is set (Wi-Fi 7 APs)
• mDNS traffic blocked (Wi-Fi 7 APs)
• SSIDs broadcast on 6Ghz despite being disabled when using WPA3 transition mode (Wi-Fi 7 APs)

[rhbirkelund]

Yeah, okay - new and new... Upgraded to Stable from Stable RC, I suppose. I didn't notice. XD

Looks like @Mloraditch  had it first. XD

[Inderdeep]

@rhbirkelund  Thanks for the update, One thing i would like to ask you how to put the URL in the signature as clickable .. i don't know where the settings are ?

[rhbirkelund]

Good ol' HTML tags. 🙂

<a href="https://www.linkedin.com/in/rbniel/">LinkedIn</a> ::: <a href="https://blog.rhbirkelund.dk/">https://blog.rhbirkelund.dk/</a><br /><br />Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution :-)<br /><br />All code examples are provided as is. Responsibility for Code execution lies solely your own.

[Inderdeep]

Awesome bro, Thanks