Meraki Supported Antenna Chart

rhbirkelund
Kind of a big deal
Kind of a big deal

Meraki Supported Antenna Chart

At one point today I found myself needing a quick overview of supported antennas for different Meraki APs.

Rather than trawling through all the datasheets every time, I've compiled this chart.

 

Let me know if there are any errors..

 

rbnielsen_0-1631184145593.png

 

 

Information in the chart is based on current datasheets.. 

 

2021-09-09: Updated as per comments.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
8 Replies 8
Inderdeep
Kind of a big deal
Kind of a big deal

@rhbirkelund : Good share buddy !

 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
PhilipDAth
Kind of a big deal
Kind of a big deal

You are a star!

KarstenI
Kind of a big deal
Kind of a big deal

Great, thank you for this!

rhbirkelund
Kind of a big deal
Kind of a big deal

I’m pretty sure the MR84 supports the Cisco stadium antenna as well though, but it’s not in the datasheets, so I opted to leave it out.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.


@rhbirkelund wrote:

I’m pretty sure the MR84 supports the Cisco stadium antenna as well though, but it’s not in the datasheets, so I opted to leave it out.


It is mentioned unter "ordering information" in the MR84 data sheet:

https://meraki.cisco.com/lib/pdf/meraki_datasheet_MR84.pdf

 

Hm

MA-ANT-23 datsheet doesn't mention MR84 as supported, but the MR84 data sheet says that MA-ANT-23 antenna is supported. 
Perhaps @CarolineS or @MerakiDave can shed some light on this? Perhaps the data sheets need a refresh.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.


@rhbirkelund wrote:

Hm

MA-ANT-23 datsheet doesn't mention MR84 as supported, but the MR84 data sheet says that MA-ANT-23 antenna is supported. 
Perhaps @CarolineS or @MerakiDave can shed some light on this? Perhaps the data sheets need a refresh.


@rhbirkelund - I'll pass this on to the appropriate team! Thanks for the heads up.

Caroline S | Community Manager, Cisco Meraki
New to the community? Get started here

Hi Everyone

 
 
This technically works if all antennas are the same. (using that antenna)
 
However, you would lose 5Ghz band which is a big drawback.
 
You can find more info 🙂
 
You should never use single-band antennas on a dual-band antenna port. It will work only for that single band and you will have bad behaviors everywhere else.

All antennas in these kind of APs should be the same.
 
 
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels