Hi all,
I am a bit confused about the channel setting on my ap's.
First of all I configured the ap's under wireless => radio settings to a static channel for 2.4Ghz nd 5.Ghz. I also click the box "Manually override channel assignment".
Additionally I add an RF Profile for the power levels.
So I would expect that the manual channel settings would apply.
If I go now to the configuration of an AP. I see under radio settings (left side) the manually defined channels.
Just a bit on the right side of the channel settings I see the channel utilization which shows completely different channels for 2.4Ghz and also 5Ghz.
So what is now really correct?
As mentioned I would expect the manual override would lead to the static settings. But I am now bit confused if the RF Profile still overrides it because of what is showed under channel utilization. See also the added picture
![Channel settings.PNG Channel settings.PNG](https://community.meraki.com/t5/image/serverpage/image-id/29041i9F11ACBD1AA056BF/image-size/large?v=v2&px=999)
My intention is to have manual settings for the channel and use the RF Profile to set the power levels.
One more question...I do not find a the place where I can unbind an RF Profile from an AP. How can I remove it from an AP?
I do not find anything in the RF Profile documentation about it.
https://documentation.meraki.com/MR/Radio_Settings/RF_Profiles