local status page ms120-24P

[nflnetwork29]

i access the local status page for the ms120-24P ?

dedicated mgmt port on the back doesnt do anything . what am i doing wrong?

[PhilipDAth]

The management port should work.  Did you, by chance, also have another adaptor also enabled (like WiFi) on the machine (if so, try disabling it first)?

[nflnetwork29]

does the mgmt port have dhcp enabled? my nic is getting a 169.x.x.

[PhilipDAth]

The management port does have DHCP enabled.

[nflnetwork29]

hmm ok im not getting any suitable ip . ill try factory reset. 

[nflnetwork29]

found this (but also not working ) 

• MS - 1.1.1.100
  In order to access this address, configure a device with the following IP settings, and then browse the address in a web browser.
  IP address: 1.1.1.99
  Subnet mask: 255.255.255.0

Note: Select MS switches have a dedicated management port that can be used without needing to set a static IP on your client.

[Brash]

Worth verifying that the local device status page is enabled in the Meraki Dashboard under Network-Wide -> General.

[nflnetwork29]

got it working i was using the dedicated port on the back . once i started using one of the switchports on the front it worked.