- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Stack MS425 with LR?
Can the MS425 switch be stacked with 40G LR transceivers instead of stacking cables?
Solved! Go to solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Flexible stacking is available on MS425 switches, which do not have dedicated stacking ports; any SFP+ interface on these switches can be configured as a stack port. You can use 2 x 10Gb/s (SFP+) or 2 x 40Gb/s (QSFP) interfaces can be connected together as flexible stacking ports. Have a look on the below document ad let me know if it answer your query ?
https://documentation.meraki.com/MS/Stacking/Switch_Stacks#Configuring_a_Flexible_Switch_Stack
Regards
Inderdeep Singh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Theoretically yes, there is nothing special about the stacking cables, they are just normal DACs.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Flexible stacking is available on MS425 switches, which do not have dedicated stacking ports; any SFP+ interface on these switches can be configured as a stack port. You can use 2 x 10Gb/s (SFP+) or 2 x 40Gb/s (QSFP) interfaces can be connected together as flexible stacking ports. Have a look on the below document ad let me know if it answer your query ?
https://documentation.meraki.com/MS/Stacking/Switch_Stacks#Configuring_a_Flexible_Switch_Stack
Regards
Inderdeep Singh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The following are listed as compatible:
MA-QSFP-40G-LR4 (single mode)
MA-QSFP-40G-CSR4 (multi mode)
MA-QSFP-40G-SR-BD (multi mode)
