New Switch-View Magnetic-Design

[MK2]

Just want to say thank you Meraki. I love to see that it goes development of the plattform never stands still 🙂
And also want to leave a ‌‌♥️ for the new design.

[RaphaelL]

Solid mixed feelings about this one.

Colors are great but I feeling like core information is now missing or scattered everywhere.

[Ryan_Miles]

I'm awaiting a reply from MS PM about this. I agree the info is now scattered and difficult to read. For example the port mode, native VLAN, and allowed VLANs used to be all grouped together for a super quick visual review. The data is now spread across three columns.

And as you said info is missing. Access Policy, auto speed rate, and STP state.

[nerdherd]

Interesting...I do like the new design too, but the usage data is quite different.

The old version if definitely smoothed more, but I'm seeing a weird dip in usage every 30 minutes on every switch, but at different times:

[MK2]

After a few hours I switched back to the "old" view.
I also see some big difference in the Usage-Graph.

[rhbirkelund]

I'm just wondering what Slack group I have to join, to join this channel. 😉

[Green_Networker]

Does this contain this change as well on to the switch port -

I couldn't select all VLANS to be allowed.

Thanks

[BlakeRichardson]

I agree that seems confusing. 

[GIdenJoe]

Yes very weird.
Try entering 1-4094 and then the pencil will appear.
When you save it will  read all again.

For some reason you cannot type all.

[rhbirkelund]

I think this may have something to do with using named vlans. Do you by any chance have that enabled?

[GIdenJoe]

Correct!

It's just on my home network and I like to try new features 😉

[rhbirkelund]

😉

Try changing the allow list on a catalyst trunk port. It'll complain no matter what you do, if you try of expand the list to other vlans thant 1-1000. Even if you change to 1-900,1010-1110.

You'll need to change the list to a low range e.g. 1-10, apply it, and then add the new range og 1-900,1010-1110.

[GIdenJoe]

Safe to say: there is some work to be done on that feature 😉

[MK2]

Any news? in the meantime, i have noticed that the symbolic devices (i.e. the pictures that are supposed to represent the switch) look kind of “cheap”. before, it was somehow more professional 

[Dunky]

The issue I have with the new layout is if you edit a port that is a member of an LACP group it doesn't tell you what ports are in the AGGR/n nor the aggregate speed (which you can see on the old version)