MS425 Stack remodling 😅😅

TomFR
Conversationalist

MS425 Stack remodling 😅😅

Hi people !
I have a big case to resolve before act...

Actually, we have a stack of MS425-16 stacked by QFSP ports and firm 14.33.

The target is a stack of 4 MS425-16 stacked by SFP+ ports.

 

My questions, before do something, are:

 - When i'll kill the existing stack, are my MS425 lose their conf ?

 - And, will the futur members of the stack of 4 DL the latest firm after reboot ?

 

Thanks for advance for your precious help

Tom

3 Replies 3
alemabrahao
Kind of a big deal
Kind of a big deal

No, if you're just going to exchange 

  the connection from QSFP to SFP and add new members no configuration will be lost, and the switches will likely lose communication with the Meraki cloud for a brief moment and probably will reboot.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
alemabrahao
Kind of a big deal
Kind of a big deal

Check the documentation https://documentation.meraki.com/MS/Stacking/Switch_Stacks#Adding_a_new_member_to_the_stack

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
TomFR
Conversationalist

Hi,

Thank you for you lightning answer 😊

We think about 2 scénarii at 1st:
modify de stacking port and just add the new members

or

Kill and rebuilt brand new stack

But if just by changing the stacking port and add the new members it s ok, it sounds good !!

Thank you .

 

We will keep you in touch with how things will go

 

Tom

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels