Rack Size for Meraki Device

SOLVED
Kushan
Here to help

Rack Size for Meraki Device

We need to install below MX & MS Appliance in Rack, will they fit in 19 inch rack ?

 

ComponentsDimensions (w x d x h)
Meraki SDWAN MX9519.08” x 11.23“ x 1.73”
Meraki Switch MS355-24X19.1" x 20" x 1.7"
1 ACCEPTED SOLUTION
KarstenI
Kind of a big deal
Kind of a big deal

Both devices are meant to be mounted in a 19" rack.

View solution in original post

4 REPLIES 4
KarstenI
Kind of a big deal
Kind of a big deal

Both devices are meant to be mounted in a 19" rack.

cmr
Kind of a big deal
Kind of a big deal

The MS355 is designed for a 4 post rack and works best in one that is 800mm deep, though you can get them to fit in a 600mm deep rack.  We have installed some in 2 post racks, but they are heavy with a lot of the weight at the back...

Kushan
Here to help

We have 2xMX95 & 3xMS355 which to be installed in rack but client has installed 2-post 41U Rack.

Can you tell if  2-post Rack can hold these devices (+ 2 patch panel) until 4-post rack is installed ,  or it's a risk ?

cmr
Kind of a big deal
Kind of a big deal

Our MS355-48Xs with both PSUs installed are all okay after two months.  The rear rails have now arrived, but aren't yet installed... 🤞

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels