Meraki

meraki-newbie · ‎Aug 10 2023

Hello all, we have some issue that, we couldn't see any dot1x event log on Dashboard for MS390-48UX2, though we could see the dot1x event log on MS125-48FP model.

Is there anybody has the same problem ?

Thank you

DarrenOC · ‎Aug 11 2023

Sounds buggy to me. What version of firmware are the MS390's running?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

meraki-newbie · ‎Aug 11 2023

our MS390 using CS 15.21.1

DarrenOC · ‎Aug 11 2023

nothing in the firmware release notes showing as an identified issue. have you reached out to Meraki support for clarification on the issue?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Meraki

Community

MS390-48UX2 Log dot1x not appear

MS390-48UX2 Log dot1x not appear