cancel
Showing results for 
Search instead for 
Did you mean: 

MS250 port channel config

SOLVED
Conversationalist

MS250 port channel config

Hi all,

 

We have 2 ms250 I want to create lacp to increase throughput  and provide redundancy incase we loose connectivity from our stack connection. Can provide the correct configuration on the port?

 

 

Thanks!

 

 

Regards,

 

Marco

1 ACCEPTED SOLUTION

Accepted Solutions
A model citizen

Re: MS250 port channel config

Hi Marco

 

The following url provides detailed literature on Link Aggregation along with a Youtube Video (Documenting the steps).

 

https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports#SwitchPorts-LinkAggrega...

 

 

 

Cheers
Ajit
ajitsnw@gmail.com
7 REPLIES 7
A model citizen

Re: MS250 port channel config

Hi Marco

 

The following url provides detailed literature on Link Aggregation along with a Youtube Video (Documenting the steps).

 

https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports#SwitchPorts-LinkAggrega...

 

 

 

Cheers
Ajit
ajitsnw@gmail.com
Kind of a big deal

Re: MS250 port channel config

It may mention it in the docs or video but in our experience, it is best to configure the downstream LACP ports first then the upstream to avoid losing connection.  Otherwise, you have to physically move the cable to a different port to get the switch back online to take its config.  Have other ports configured as backups in case you need to do this.  

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Highlighted
Conversationalist

Re: MS250 port channel config

Hi Adam,

 

I already have stacked the 2 ms250 via the stacking cable. Need to implement lacp for increasing throughtput and also incase the stack loose connectivity we have a backup connectvity on  both of the switch. Is this the best practice or any recommendation?

Kind of a big deal

Re: MS250 port channel config

We did LACP for that purpose at one of our sites.  What speed is the stack cable and how many ports are you wanting to setup in LACP?

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Here to help

Re: MS250 port channel config

LACP causes spanning tree issues with ver 10.26

Conversationalist

Re: MS250 port channel config

2 port on both of our stack switch

 

Conversationalist

Re: MS250 port channel config

Another concern, from my meraki switch going to firewall and router can we use lacp for redundancy as well. Coz currently I only have one line going thru firewall and another one going thru router.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Points Contest
Join us for a month-long contest with heaps of swag to win!

Learn More ›
Labels