MS 15.17 bug report - mgmt vlan is displayed incorrectly when changed - never updates

[ToryDav]

Current Firmware - MS 15.17
Model: MS120-8LP

Severity - None (informational)

I removed VLAN 1 from my network and changed the management vlan to vlan 10. all my equipment uses DHCP for the LAN management IP in my lab, so the change was easy - however I noticed that the MS 120 still displays vlan 1 on the LAN IP.

I can assure you VLAN 1 no longer exists. My uplink does not carry vlan 1

The local status page shows the correct information, just displayed wrong in dashboard.

Switch is healthy and I can ping its address, so there isn't any issue. Just wanted to submit this. Let me know if I should submit this elsewhere.

Thank you.
Tory Davenport

[BlakeRichardson · Accepted solution]

@ToryDav  It would be worth opening a support case just to pass this onto support.