MS 15.17 bug report - mgmt vlan is displayed incorrectly when changed - never updates

SOLVED
ToryDav
Building a reputation

MS 15.17 bug report - mgmt vlan is displayed incorrectly when changed - never updates

Current Firmware - MS 15.17
Model: MS120-8LP

Severity - None (informational)


I removed VLAN 1 from my network and changed the management vlan to vlan 10. all my equipment uses DHCP for the LAN management IP in my lab, so the change was easy - however I noticed that the MS 120 still displays vlan 1 on the LAN IP.

ToryDav_0-1669148448144.png

 



I can assure you VLAN 1 no longer exists. My uplink does not carry vlan 1

ToryDav_1-1669148489637.png


The local status page shows the correct information, just displayed wrong in dashboard.

ToryDav_2-1669148534116.png


Switch is healthy and I can ping its address, so there isn't any issue. Just wanted to submit this. Let me know if I should submit this elsewhere.

Thank you.
Tory Davenport

 

1 ACCEPTED SOLUTION
BlakeRichardson
Kind of a big deal

@ToryDav  It would be worth opening a support case just to pass this onto support. 

www.btr.net.nz

View solution in original post

1 REPLY 1
BlakeRichardson
Kind of a big deal

@ToryDav  It would be worth opening a support case just to pass this onto support. 

www.btr.net.nz
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels