ESXI 6.5 with MS210

Here to help

ESXI 6.5 with MS210

Hi All, 


I'm new to Meraki and trying to setup aggregate on 2 ports on MS210 to a EXSI host.  

I read that Meraki only support LACP? Would like to know whether anyone manage to get MS to work with the version 6.5. 


Thank you 


Kind of a big deal
Kind of a big deal

Do you have a VMware license that has distributed switches? That is a requirement. Without that you can use a standard round-robin approach for your NICs.

Kind of a big deal
Kind of a big deal

I don't think I have any clients left using channel aggregation with VMWare.  Everyone I know uses round-robin.  A simpler config, and spreads the load nicely.

Head in the Cloud

I don´t recommend to do a port-channel with ESXi Servers.

I am driving 14 ESXi Servers with each 4 10Gig LAN-Ports. I tried with port-channels (aggregates), but it messed up (with Cisco classic (as Cisco Nexus) and Meraki). I do not use LACP in this case. And it´s working. ESX puts the traffic in the right way on the network ports for it´s own (round robin).

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.