Auto Focus not saving

Chris_Carlyle
Conversationalist

Auto Focus not saving

I have noticed that several of our cameras (MV22 and MV72) will focus in great using the auto focus feature in dashboard however the next time I go to check the cameras they are out of focus again. I just upgraded to Beta 4.0 and saw it in the previous stable release as well.

 

Thanks

CCNA R&S, CCNA Security, CMNA
4 REPLIES 4
NolanHerring
Kind of a big deal

Your not alone. Have a look here:

https://community.meraki.com/t5/Smart-Cameras/MV22-MV72-Auto-Focus-vs-Manual-Focus/m-p/54635

I think one solution was to perform an auto-focus, then change it to manual and hit save and it 'should' keep it there. Not ideal of course but something for now.
Nolan Herring | nolanwifi.com
TwitterLinkedIn
PhilipDAth
Kind of a big deal
Kind of a big deal

I find that reloading the page and doing it again often sorts it out for me.

Priesty
Building a reputation

I have had this issue as well, I found that if you auto focus the camera and then switch it to "manual" mode, it will save.

EJN
A model citizen

As others have said, we experienced this too. The fix for us has been auto-focus then change to manual focus.

Esteban J Nunez
School and Church
K-12 Education
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.