What signal level is required?

[cmr]

We've deployed some MT10s and some are seeing APs but not connecting.  Does anyone have experience of what signal level is generally required for them to work without me slowly moving it towards the AP?

 

[Greenberet]

I'm getting a lot of "Gateway MR36 detected insufficient RSSI from sensor YYYY" messages, because of my bad RSSI values, but they are working fine here

[BlakeRichardson]

No idea sorry, the only sensor we have at the moment is in a comms room that is connected to an MV72 that is has a corridor and a thick concrete wall between it and the MT sensor. 

[Ryan_Miles · Accepted solution]

I think it wants better than -85. As for the obvious things. What model AP’s and what firmware version are they running?

[cmr]

Thanks @Ryan_Miles I saw these in the event log that support your statement:

However the sensor can see four APs that are all MR42s running 28.4 and one of them has a -67dBm signal

 

So far I've tried rebooting the MT, multiple of the MRs, making sure Bluetooth is on and am now a bit stuck!

[cmr]

I've opened a case: 07014827 to see if something has simply got confused...