Warm spare active-active

Solved
kuni
Getting noticed

Warm spare active-active

Hi guys,

 

Please refer the below picture.

Is it possible ?

 

15712979952163773831631768357128.jpg

 

1 Accepted Solution
ww
Kind of a big deal
Kind of a big deal

warm spare is not active active. 

you could run both providers to both mx's if you have enough IP addresses  between the provider and your MX's .

 

https://community.meraki.com/t5/Security-SD-WAN/Does-MX-device-can-support-dual-active/m-p/64242#M16...

so the WAN ports can be both active, but not Both MX's (in warm spare) at the same time

View solution in original post

1 Reply 1
ww
Kind of a big deal
Kind of a big deal

warm spare is not active active. 

you could run both providers to both mx's if you have enough IP addresses  between the provider and your MX's .

 

https://community.meraki.com/t5/Security-SD-WAN/Does-MX-device-can-support-dual-active/m-p/64242#M16...

so the WAN ports can be both active, but not Both MX's (in warm spare) at the same time

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels