Warm spare active-active

Solved
kuni
Getting noticed

Warm spare active-active

Hi guys,

 

Please refer the below picture.

Is it possible ?

 

15712979952163773831631768357128.jpg

 

1 Accepted Solution
ww
Kind of a big deal
Kind of a big deal

warm spare is not active active. 

you could run both providers to both mx's if you have enough IP addresses  between the provider and your MX's .

 

https://community.meraki.com/t5/Security-SD-WAN/Does-MX-device-can-support-dual-active/m-p/64242#M16...

so the WAN ports can be both active, but not Both MX's (in warm spare) at the same time

View solution in original post

1 Reply 1
ww
Kind of a big deal
Kind of a big deal

warm spare is not active active. 

you could run both providers to both mx's if you have enough IP addresses  between the provider and your MX's .

 

https://community.meraki.com/t5/Security-SD-WAN/Does-MX-device-can-support-dual-active/m-p/64242#M16...

so the WAN ports can be both active, but not Both MX's (in warm spare) at the same time

Get notified when there are additional replies to this discussion.