Third WAN

OBARRERA
Here to help

Third WAN

Hi felow companions.

 

Can I enable a third wan port on a MX 250?

 

HEEELP!

5 REPLIES 5
UCcert
Kind of a big deal

Hi @OBARRERA 

 

This isn’t possible. You can only have two active WAN ports. The third would be a GSM/cellular failover option.

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

And Meraki support can enable it fron the backend?

 

😞

jbright
Building a reputation

The new MX75 has hardware support for 3 WAN interfaces and the MX85, MX95 and MX105 have hardware support for 4 WAN interfaces. Software support for more than two WAN interfaces on these models is not expected until MX 18 firmware. Considering that MX 17 firmware only became available in Public Beta two days ago, it's going to be a while before this feature is supported.

 

I don't know if the MX250 and MX450 even have the hardware to support more than two WAN interfaces.

UCcert
Kind of a big deal

Both models don’t support a third WAN and this isn’t available on the newer models currently 

Darren O'Connor | uccert.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Inderdeep
Kind of a big deal

@OBARRERA : Corrected said by @UCcert . Only 2 WANs !

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels