Replacing an ASA with a MX100

Blackhorse
Just browsing

Replacing an ASA with a MX100

I am trying to roll in a replacement for an aging ASA on a new ISP connection. When I attempt to configure the LAN side, I get an error: The VLAN subnet 192.168..200.0/23 conflicts with a remote VPN subnet on the non-Meraki peer. I am unable to save the configuration change. I have the MX set up as a Spoke, and do not have it connecting to the ASA. Is there any way to get around this issue or do I have to schedule an outage? This is something I really don't want to do as we have offices around the globe and many sites are working 3 shifts.

1 REPLY 1
PhilipDAth
Kind of a big deal
Kind of a big deal

It means you already have a non-Meraki VPN configured in the Meraki Dashboard using the subnet 192.168.200.0/23.  You need to remove or change that VPN.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels