We are in a trial with an MX65 and MX100. We want to use the PoE ports on the MX65 for Cisco phones. Neither port 11 or 12 are providing power. I logged in to the local device and both ports are enabled. I've tried different cables and phones as well.
Should be by default but make sure POE is turned on for the port setting as well. But the other posters are more than likely on the right track about it being the old POE standard. We have a few of those floating around that cause trouble with some of our MS POE switches as well.
Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO If this was helpful click the Kudo button below If my reply solved your issue, please mark it as a solution.