Need a help with setting up MX devices across different network.
Hey everyone i was hoping if anyone could help me! We just bought 4 x MX 64 and trying to configure them properly.
So far we manage to get them, however our current network has pfsense and vpls tunnel configured. Now i set VLAN on one of the device with the same gateway settings that are on our pfsense it works all of our computers are now visible on meraki but we do have file server and AD on separate network i.e( 172.168.2.xx) network and our computers are on (172.168.8.xx) network. We are unable to access drives on file server, so far we set firewall rules to pass any networks but that didn't work.
@Dipen have you changed the MX from single VLAN mode to VLANs mode? You can then set up an interface for each VLAN and it will route between them. Just to be clear, you are replacing the pfsense device with the MX?
@Dipen under Security & SD-WAN / Addressing and VLANs simply press Add VLAN and choose settings like below, but reflecting your network. The MX IP in each VLAN should be the default gateway that hosts in that VLAN are pointing to: