cancel
Showing results for 
Search instead for 
Did you mean: 

Missing Clients MX64

SOLVED
Here to help

Missing Clients MX64

Morning all,

 

I'm trying to setup a NAT configuration for our Telephone system however the MX64 isn't displaying the client and local IP address. I can connect to the local IP address fine it's just the MX64 isn't picking it up under the client list. I also have the same thing for our Ruckus controller which is odd.

When I scan the network using LAN scan it picks them up fine so I'm a little confused as to why the MX64 won't pick them up.

 

Thanks in advance,

Stu

1 ACCEPTED SOLUTION

Accepted Solutions
Here to help

Re: Missing Clients MX64

Just realised those particular clients had a different Router IP, oops.

2 REPLIES 2
Head in the Cloud

Re: Missing Clients MX64

Hi 

This is strange.

How about firmware update?

VLANs are on MX?

 

Also hope the firewall is in Routed Mode not Passthrough Mode.

Cheers
Ajit
ajitsnw@gmail.com
Here to help

Re: Missing Clients MX64

Just realised those particular clients had a different Router IP, oops.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.