Missing Clients MX64

SOLVED
StuKoalaIT
Getting noticed

Missing Clients MX64

Morning all,

 

I'm trying to setup a NAT configuration for our Telephone system however the MX64 isn't displaying the client and local IP address. I can connect to the local IP address fine it's just the MX64 isn't picking it up under the client list. I also have the same thing for our Ruckus controller which is odd.

When I scan the network using LAN scan it picks them up fine so I'm a little confused as to why the MX64 won't pick them up.

 

Thanks in advance,

Stu

1 ACCEPTED SOLUTION
StuKoalaIT
Getting noticed

Just realised those particular clients had a different Router IP, oops.

View solution in original post

2 REPLIES 2
AjitKumar
Head in the Cloud

Hi 

This is strange.

How about firmware update?

VLANs are on MX?

 

Also hope the firewall is in Routed Mode not Passthrough Mode.

Regards,
Ajit
AjitsNW@gmail.com
www.ajit.network
StuKoalaIT
Getting noticed

Just realised those particular clients had a different Router IP, oops.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels