Meraki Z3 - Integration with Cisco NGFW?

SOLVED
Joe2112
Here to help

Meraki Z3 - Integration with Cisco NGFW?

Greetings -

 

Is it possible to integrate the Meraki Z3 teleworker gateway with a non-Meraki MX at the head-end? Perhaps a Cisco NGFW2130?

 

I am assuming "no" but I figured I'd get the official answer here.

 

Cheers,

Joe

1 ACCEPTED SOLUTION
cwf
Getting noticed

Yes. 3rd Part VPN tunnels are supported and I have used them many times. Its not feature rich, but it works.

 

 https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Applian...

View solution in original post

5 REPLIES 5
cwf
Getting noticed

What do you mean by "integrating"? Connecting with VPN tunnels?

@cwf 

 

Yes, that is what I was referring to. I saw the option for the Meraki MX AutoVPN feature but was wondering if it would support VPN tunnels with a non-Meraki MX appliance.

 

Cheers

Joe

cwf
Getting noticed

Yes. 3rd Part VPN tunnels are supported and I have used them many times. Its not feature rich, but it works.

 

 https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Applian...

@cwf 

 

At this point I just need split-tunneling on the Meraki Z3 side. It's for a couple of 'work-from-home' colleagues.

 

Thank you for the information/link.

 

Cheers,

Joe

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels