MX75 GPON SFP

burnz
Getting noticed

MX75 GPON SFP

Hi,

 

is there any way to use a GPON SFP within the SFP Port auf the MX75 or other MX?

The Datasheet only mentions the Meraki SFP, but I already used others with the Switches.

 

https://documentation.meraki.com/MX/MX_Overviews_and_Specifications/MX75_Datasheet

 

I would like to use it on my Telekom FTTH with a module like this:

 

https://geschaeftskunden.telekom.de/internet-dsl/produkt/digitalisierungsbox-glasfasermodem-kaufen

5 Replies 5
CptnCrnch
Kind of a big deal
Kind of a big deal

The SFP will probably work flawlessly, but opening a case that has something to do with it could take longer than expected.

DarrenOC
Kind of a big deal
Kind of a big deal

As @CptnCrnch states any number of Sfps will work but you’ll be asked to remove it by Meraki support should you hit an issue.  

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
MerryAki
Building a reputation

Hey burns, I have searched for a post like yours, actually, my first MX is on the way (for my homelab)

It is possible!

As I want to replace the current setup with an MX, I will keep the Zyzel/Digitalisierungsbox Modem. It works flawlessly. All you need to to is to change the line ID, call the Telekom support for rediscovery and that’s it.

Telekom contact for rediscovery/site for the order process:

(You will then need to use VLAN 7 and PPPoE, but thats mentioned in the link below)
Actually, I read this online, too.

https://blog.jaseg.de/posts/telekom-gpon-sfp/

And there is my post on a german speaking Ubiquiti Forum:

ED8EBF23-7ED7-4826-9493-978916951712.png

0964A386-0442-4957-ACB2-B809FAE9BFD2.png

I will add some screenshots when my MX is there to the rescue 🛟 

burnz
Getting noticed

Short update i bought the Zyxel/Digitalisierungsbox SFP and placed it in MS220-8P and it works like expected I'm able to access webinterface for configuration and so on.

 

As I'm still on MX67 I expect that this will work too when i do the change.

MerryAki
Building a reputation

@burnz @That’s Great. Another option you might have is that you can bridge VLAN 7 from the SFP/SFP+ Port to a RJ45 Port and connect it with the MX. 

I know, that’s ugly, but it might be a short-term workaround, while you’re not having a Port for that module.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels