Hi for all,
Somebody can i help me,
For a MX250 can i install a 1G SFP module in a SFP+ slots of the WAN interface that the equipment has?
Thanks in advanced
Solved! Go to Solution.
I do not see a challenge here, we are using 1G SFP's in SFP+ slots for few of our customers.
Yes that is possible. I try to avoid doing that when I can just use one of the built-in copper ports but I've done it for sure at sites where I don't have many spare ports.
Adam thanks for your response
In my case i need connected with a router of other service provider a WAN Level, i understand what i can only use the WAN ports and the lan ports and the lan ports do not apply.
You can find complete SFP compatibility on this page:
On the right hand we have marked the models compatible with each SFP type.
Hope this helps.
i think the point has been missed here, what is being asked is can you use the SFP-1GB-SX in the 10G wan ports, or do you have to use a SFP-10G-SR in those 2 ports? yes the MX250 can take SFP-1GB-SX but can they be used in tho 10G WAN interface on the MX250 rather than the normal ports