MX250 Usage column

Solved
mx2020
Conversationalist

MX250 Usage column

Hi all,

 

Would like to check the usage column value in clients monitoring in MX250, this usage column does it involved in all client passing through the firewall?

 

Even internal LAN traffic between different VLAN, it will add up in the usage field?

 

Thanks.

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

> 200GB within few hours

 

That is nothing for an MX250.  It wouldn't even cause a blip in its performance.

View solution in original post

4 Replies 4
PhilipDAth
Kind of a big deal
Kind of a big deal

Correct.

mx2020
Conversationalist

Appreciate the reply.

 

Would like to know if 1 client use up to 200GB within few hours, will it cause the slowdown for other client to access internal server?

 

The usage was due to that particular client install a screen sharing software where a lot user was connecting to it.

 

Will this cause slowness in the traffic within LAN and traffic going out to internet due to 1 client used up to 200GB within few hours?

 

Thanks.

 

 

 

MarcP
Kind of a big deal


@mx2020 wrote:

 

The usage was due to that particular client install a screen sharing software where a lot user was connecting to it.

 


When they all connected at the same time, it should,

This will increase the usage, even I think the MX250 is quite big and should handle this easily.

PhilipDAth
Kind of a big deal
Kind of a big deal

> 200GB within few hours

 

That is nothing for an MX250.  It wouldn't even cause a blip in its performance.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels