MX100 SFP Trunk ports ?

lmatthews
New here

MX100 SFP Trunk ports ?

Hey guys. Just received my first Meraki MX100 and it seems pretty cool. The one issue I see is, it looks as it the 2 SFP ports can not be configured as trunk ports.  I found some documents that seem to say the SFP ports are defaulted as trunk ports. Can anyone confirm if the SFP ports are defaulted as trunk ports or can be configured as trunk ports

 

 

Thanks

5 REPLIES 5
NolanHerring
Kind of a big deal

I don't have any MX100s, but I do have MX84 and the two SFP ports are what I use, and I configured them as trunk.
Nolan Herring | nolanwifi.com
TwitterLinkedIn

Awesome.  Do the ports come defaulted  as trunks ports ?

That I don't remember =(
Nolan Herring | nolanwifi.com
TwitterLinkedIn
ww
Kind of a big deal
Kind of a big deal

If you set "use vlans" at the routing section all (non wan)ports  are trunk by default.  

If you dont set this. All are accessports

cwf
Getting noticed

Go to Security & SD-WAN>>Addressing and VLANs>>Check the box "Use VLANs>> Per-port VLAN settings will appear with an edit box

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels