MX VPN subnet translation

[NEWLinc]

How does one go about enabling VPN subnet translation on an MX appliance.  Documentation states under site to site VPN there is a VPN subnet translation "enabled" button but I don't see that anywhere in the site to site configuration screen.

[ww · Accepted solution]

Note: The features described in this article must be enabled by Cisco Meraki Support.

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

[NEWLinc]

Thx !!

[DarrenOC]

Hi @NEWLinc , that feature needs to be enabled by support as per the below document 

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

[NEWLinc]

Thanks for the response.