Issue with 1:1 NAT

[BAndersonIII]

Hello, 

I'm trying to NAT an address for a server on the Meraki's Subnet, but for some reason, outside clients still only use the original IP address for the server. I need to NAT because some sites have conflicting IP address schema. Is there any reason that this shouldn't work?

As I said, this is set up on a meraki with the 172.30.50.0/24 subnet configured.

Is it not possible for the Meraki to Nat an address that's on it's own Subnet?

[ww · Accepted solution]

That nat to the wan port.

If you need to nat for autovpn this is your option  https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation

[BAndersonIII]

Thank you.