HomeNet ->Router Z1 -> VPN -> ASA ->firm subnet

Net-admin
New here

HomeNet ->Router Z1 -> VPN -> ASA ->firm subnet

Hi all,

 

I'm using a Z1 as Router in my home network and want to establish VPN to an ASA to reach only one firm subnet from my home computer via VPN. I don't have any other Meraki VPN devices. If I configure site-to-site VPN with my Z1 as Spoke and my ASA as non Meraki peer, I get an error:

 

"A site-to-site VPN spoke requires at least one hub to connect to."

 

If I configure the Z1 as hub, then the IPsec tunnel to my ASA is established successfully but there's no data exchange. Nothing within the tunnel is reachable. Default traffic without VPN is working fine.

In the Z1 routing table the VPN subnet route is marked grey.

 

After studying documentation and community discussions I don't believe that my scenario is possible.

Does anybody has an idea?

 

 

1 Reply 1
rhbirkelund
Kind of a big deal
Kind of a big deal

Apologies, my post was incorrect. As such, I've removed it.
LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels