Hi all,
I'm using a Z1 as Router in my home network and want to establish VPN to an ASA to reach only one firm subnet from my home computer via VPN. I don't have any other Meraki VPN devices. If I configure site-to-site VPN with my Z1 as Spoke and my ASA as non Meraki peer, I get an error:
"A site-to-site VPN spoke requires at least one hub to connect to."
If I configure the Z1 as hub, then the IPsec tunnel to my ASA is established successfully but there's no data exchange. Nothing within the tunnel is reachable. Default traffic without VPN is working fine.
In the Z1 routing table the VPN subnet route is marked grey.
After studying documentation and community discussions I don't believe that my scenario is possible.
Does anybody has an idea?
