Client VPN Pool?

SOLVED
jon1
Here to help

Client VPN Pool?

After enabling Client VPN and adding a subnet, do I have to configure a DHCP pool for the VPN users?

Or is this automagicly done?

1 ACCEPTED SOLUTION
WadeAlsup
A model citizen

Hi @jon1

 

No need for a DHCP pool to be setup, as it is indeed "automagicly" done. The users session will receive an address within that subnet when they connect. You'll then see them show up in Network-wide > Clients. 


Found this helpful? Give me some Kudos! (click on the little up-arrow below) and If my reply solved your issue, please mark it as a solution 🙂

View solution in original post

1 REPLY 1
WadeAlsup
A model citizen

Hi @jon1

 

No need for a DHCP pool to be setup, as it is indeed "automagicly" done. The users session will receive an address within that subnet when they connect. You'll then see them show up in Network-wide > Clients. 


Found this helpful? Give me some Kudos! (click on the little up-arrow below) and If my reply solved your issue, please mark it as a solution 🙂
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels